ProStore

  • Home
  • News
    • Event
    • Corporate
    • Products
  • Calpeda in the World
  • Case History
  • Focus
  • CALPEDA.COM

News 168

 

A new line of energy efficient products

The MCE trade show, which ended recently in Milan, is confirmed as being one of the most important appointments in the sector, with more than 2400 exhibitors and 162,000 visitors from all over the world. Even the balance of our participation was undoubtedly positive, with plenty of visitors who came to our stand. We very […]

16 days ago More
 

Calpeda will be taking part in MCE 2018

Everything is ready for the 41st edition of MCE – MOSTRA CONVEGNO EXPOCOMFORT, the world’s leading exhibition dedicated to residential and industrial installations, scheduled for 13 – 16 March 2018 at Fiera Milano. The concept behind this edition is technological innovation and energy efficiency in the industry. Over the past few years, the attention of […]

1 month ago More
 

Submersible pumps

Submersible pumps are centrifugal, typically vertical, and can operate when immersed in the liquid to be pumped. The motor and pump are made from a single block. As the motor has to work while immersed in the liquid to be pumped, it is made to be perfectly waterproof. A submersible pump, however, is different from […]

3 months ago More
 

Ken Hall, Honorary Life Council Member of Europump

Ken Hall the Managing Director of our UK subsidiary and now Regional Manager of our Sub-Saharan Africa operations stood down as the UK representative on Europump Council (The European Association of Pump Manufacturers) at the last Europump General Assembly held in Bodrum, Turkey. Both Ken and his wife Serena were honoured by the outgoing President, […]

4 months ago More
 

The Big 5 Dubai 2017

UAE are ready to host the 38th edition of The Big 5 Dubai, The main building and construction trade show for the whole of the Middle East, North Africa and East Asia region. The event will take place in the 100.000 square metres of Dubai World Trade Centre from the 26th to the 29th of […]

5 months ago More
 

100% Hydraulic Test

A characteristic that has always marked Calpeda production is the test phase, which is extended to all our products. It is important to highlight that when we speak about testing we do not just mean the different control protocols relative to design, the assembly procedures and the compliance of the individual parts. What guarantees the […]

5 months ago More
 

Flexibility and efficiency

Calpeda production covers all types of pressure boosting sets: fixed speed, variable speed, and groups with one variable speed pump and the rest fixed speed pumps. If the main quality of a pressure boosting system is reliability when supplying water, even with great differences in consumption, the application of inverter technology has made it possible […]

6 months ago More
 

Peripheral Pumps

Peripheral electric pumps may generally be regarded as an intermediate category between centrifugal pumps and volumetric pumps. While in the first category, an increase in the head implies a decrease in the flow rate, in the latter the flow rate is not affected by pressure. Instead, the curve of the peripheral pumps follows a trend […]

8 months ago More
 

Training in Moscow: focus on variable speed systems

Last month a training session was held in Moscow for our distributors who operate in the Russian and Ukraine market. It was an instructive meeting to present the characteristics of the products and demonstrate how they work, but it was also an occasion for acknowledging possible demands and specific requests from the market. A consistent […]

9 months ago More
 

A lifetime at Calpeda

How would you expect an interview with a person who is about to retire after 52 years and six months of work in the same company to start? Certainly without hearing the word apprentice, decidedly more natural coming from a young boy who is starting his first job. Instead, Antonio Battanoli, who spent a lifetime […]

10 months ago More
Pagina 1 di 1812345...10...»Ultima »
Articoli recenti
  • A new line of energy efficient products
  • Calpeda will be taking part in MCE 2018
  • Submersible pumps
  • Ken Hall, Honorary Life Council Member of Europump
  • The Big 5 Dubai 2017
Categorie
  • Calpeda in the World
  • Case History
  • Corporate
  • Event
  • Focus
  • News
  • Primo Piano
  • Products
CALPEDA S.P.A.
Calpeda is a company that is committed to study, to develop, to manufacture and to industrialize pumping systems.

WHO WE ARE
LINKS
info@calpeda.it
www.calpeda.com
Company Portal
Cookie Policy
CONTACTS
Calpeda S.p.A
Via Roggia di Mezzo, 39
Montorso Vicentino 36050 Vicenza (Italy)

T + 39 0444 476 476
F + 39 0444 476 477
Calpeda S.p.A. - Via Roggia di Mezzo, 39 - 36050 Montorso Vicentino - Vicenza / Italy - P.IVA 0014263024