ProStore

  • Home
  • News
    • Event
    • Corporate
    • Products
  • Calpeda in the World
  • Case History
  • Focus
  • CALPEDA.COM

Focus 12

 

A joint conference about sustainability

Europump, Ceir and Pneurop recently held a joint conference in Brussels, alongside their annual meetings. The event considered climate change, research and innovation, digital transformation, CBAM (carbon border adjustment mechanism), sustainable taxonomy, circular economy & eco-design, as well as the restriction of certain metals and substances due to environmental concerns. Ken Hall, Chairmain of the […]

26 days ago More
 

Pump efficiency: the JWG published the first two definitive standards

Europump’s challenge, that of blending product performance with energy saving, has been obtaining tangible results, also thanks to the technical support given by pump manufacturers to the energy policies of the European Commission. The JWG (Joint Working Group), which deals with pump and group efficiency and which Calpeda participates in actively, met on 4 and […]

3 years ago More
 

IE3 electric motors: Calpeda in line with the new directive

The electricity consumed by motors represents about 70% of the total electricity used by industry in Europe. This piece of information is sufficient for understanding the full importance of Commission Regulation (EC) No 640/2009 implementing Directive 2005/32/EC of the European Parliament on electric motors undertaken by the European Community a few years ago, and which […]

5 years ago More
 

Performance and energy saving

EEI (Energy Efficiency Index), in other words Extended Product Approach, which means considering the product in its entirety: pump, motor and frequency converter if present. This is the new approach by which Europump, and more specifically the JWG (Joint Working Group) that deals with pump and set efficiency, is aiming at additional energy saving in […]

5 years ago More
 

A new approach for energy saving

The activity of the work group (JWG) for drafting the new regulation on the minimum efficiency of cold water pumps (MEI), a group Calpeda has been involved in through its experts Michele Dai Prè and Andrè Kistner, is continuing. The work, which started in 2012 as part of the larger EC Regulation 547/2012 which establishes […]

7 years ago More

Calpeda, a reference point in Assopompe

A technical committee with the aim of following developments in standards and European directives has been created in Assopompe. The goal of the committee is to try and reduce the load that weighs on each individual company, and for Europump and the appropriate headquarters to support the needs of Italian pump producers as one. References […]

8 years ago More
 

European directive on circulators

As a part of the European Community project for the reduction of energy consumption, Europump published the new legislation for the eco-compatible design of circulators. Calpeda has already adapted by introducing its own series of high energy saving products. Attached below is the European Directive. EFF_CIRCULATORS

8 years ago More
 

New regulations on water pumps

The new regulation EC 547/2012 that establishes the eco-compatible design  for water pumps was published on 25th June 2012. This regulation is part of a bigger European Community project for the reduction of energy consumption. The water pumps are classified as part of electric motor systems. The overall potential for better energy saving for these […]

10 years ago More
 

Calpeda at the UNI commission meeting

On November 17th, a meeting of the UNI Pump Commission (the regulation and certification authority) was held in Milan, and the meeting was attended for Calpeda by Mr. Francesco Zio, technical, sales and quality executive. Various important matters were discussed in the morning, and stock of the situation was taken regarding Italian participation and contribution […]

10 years ago More
 

Europump Ecodesign Roundtable

Ken Hall, Managing Director of Calpeda UK, in his capacity of Europump Energy Councillor, was one of the speakers at the recent Europump Ecodesign Roundtable held on Thursday 6th October in Brussels. The idea of the event was to bring together people from the Pump Industry, along with industry Suppliers, Users, and Consultants plus NGO’s […]

10 years ago More
Pagina 1 di 212»
Articoli recenti
  • Calpeda at MCE 2022
  • A joint conference about sustainability
  • The strong points of the new MXV-B vertical stainless steel pump
  • Calpeda at Sicur 2022
  • Three points that express the revolutionary simplicity of Mèta
Categorie
  • Calpeda in the World
  • Case History
  • Corporate
  • Event
  • Focus
  • News
  • Primo Piano
  • Products
CALPEDA S.P.A.
Calpeda is a company that is committed to study, to develop, to manufacture and to industrialize pumping systems.

WHO WE ARE
LINKS
info@calpeda.it
www.calpeda.com
Company Portal
Cookie Policy
CONTACTS
Calpeda S.p.A
Via Roggia di Mezzo, 39
Montorso Vicentino 36050 Vicenza (Italy)

T + 39 0444 476 476
F + 39 0444 476 477
Calpeda S.p.A. - Via Roggia di Mezzo, 39 - 36050 Montorso Vicentino - Vicenza / Italy - P.IVA 0014263024