ProStore

  • Home
  • News
    • Event
    • Corporate
    • Products
  • Calpeda in the World
  • Case History
  • Focus
  • CALPEDA.COM

Corporate 95

 

Bearings that are 100% reliable: longer lasting and more energy efficient

  Even details are important when making a pump. Bearing life, for example, is a key aspect on the reliability of the pump. The purpose of ball bearings is mainly to support the whole load of the shaft line and also withstand the axial thrust of the rotor. Pump manufacturers usually guarantee that their bearings […]

4 years ago More
 

Calpeda UK: a new General Manager

Calpeda are pleased to announce that Jon Bennett has been appointed to the role of General Manager of its UK subsidiary Calpeda Limited. Jon has been a member of the Calpeda UK team for a number of years in various roles most recently National Sales Manager. The new appointment is part of a series of […]

4 years ago 1 More
 

Calpeda pump casings = 100% reliability

What makes our pumps special? After an all-round hydraulic test, here’s another aspect that explains Calpeda’s special approach to its products. This time our concentration is on pump casings, in particular those of the NM series centrifugal pumps. The starting point is the UNI-EN 12162 Standard, namely the standard that specifies the hydrostatic test procedure […]

4 years ago More
 

Submersible pumps

Submersible pumps are centrifugal, typically vertical, and can operate when immersed in the liquid to be pumped. The motor and pump are made from a single block. As the motor has to work while immersed in the liquid to be pumped, it is made to be perfectly waterproof. A submersible pump, however, is different from […]

5 years ago More
 

Ken Hall, Honorary Life Council Member of Europump

Ken Hall the Managing Director of our UK subsidiary and now Regional Manager of our Sub-Saharan Africa operations stood down as the UK representative on Europump Council (The European Association of Pump Manufacturers) at the last Europump General Assembly held in Bodrum, Turkey. Both Ken and his wife Serena were honoured by the outgoing President, […]

5 years ago More
 

100% Hydraulic Test

A characteristic that has always marked Calpeda production is the test phase, which is extended to all our products. It is important to highlight that when we speak about testing we do not just mean the different control protocols relative to design, the assembly procedures and the compliance of the individual parts. What guarantees the […]

5 years ago More
 

Peripheral Pumps

Peripheral electric pumps may generally be regarded as an intermediate category between centrifugal pumps and volumetric pumps. While in the first category, an increase in the head implies a decrease in the flow rate, in the latter the flow rate is not affected by pressure. Instead, the curve of the peripheral pumps follows a trend […]

5 years ago More
 

Training in Moscow: focus on variable speed systems

Last month a training session was held in Moscow for our distributors who operate in the Russian and Ukraine market. It was an instructive meeting to present the characteristics of the products and demonstrate how they work, but it was also an occasion for acknowledging possible demands and specific requests from the market. A consistent […]

5 years ago More
 

A lifetime at Calpeda

How would you expect an interview with a person who is about to retire after 52 years and six months of work in the same company to start? Certainly without hearing the word apprentice, decidedly more natural coming from a young boy who is starting his first job. Instead, Antonio Battanoli, who spent a lifetime […]

5 years ago More
 

What companies are looking for: Calpeda meets students

The Istituto Superiore Silvio Ceccato (Silvio Ceccato High School) organised a cycle of meetings entitled “Quello che le imprese cercano” (What companies are looking for) in collaboration with the international work agency Synergie Italia and the most important territorial companies. Over four days the students, divided according to their study programme (mechatronics, computing, technical maintenance, […]

5 years ago More
Pagina 2 di 10«12345...10...»Ultima »
Articoli recenti
  • Advanced technology, performance and comfort: all in a small pump
  • Mèta Small: small and even more revolutionary
  • Dirty water drainage pumps for the industrial sector
  • Calpeda and Caprari now together
  • Calpeda at MCE 2022
Categorie
  • Calpeda in the World
  • Case History
  • Corporate
  • Event
  • Focus
  • News
  • Primo Piano
  • Products
CALPEDA S.P.A.
Calpeda is a company that is committed to study, to develop, to manufacture and to industrialize pumping systems.

WHO WE ARE
LINKS
info@calpeda.it
www.calpeda.com
Company Portal
Cookie Policy
CONTACTS
Calpeda S.p.A
Via Roggia di Mezzo, 39
Montorso Vicentino 36050 Vicenza (Italy)

T + 39 0444 476 476
F + 39 0444 476 477
Calpeda S.p.A. - Via Roggia di Mezzo, 39 - 36050 Montorso Vicentino - Vicenza / Italy - P.IVA 0014263024